Matek Systems MR24-30-TX MLRS MAVLink 2.4GHz TX Module Kit Receiver for FPV Drone
Direct purchase from the factory 
Kwishyura neza bihamye
Impano y'ubuntu
Politiki yo kohereza
Politiki yo kugaruraImpano y'ubuntu
Murakaza neza kuri Roymall, urubuga rwawe rw'impano zihariye. Turashimira cyane ubufasha bwawe, kandi turabategereza impano y'ubuntu buri guhaha. Shakisha ibyifuzo byawe kandi witegure kubona impano yawe.Politiki yo kohereza
Tuzakora neza kohereza ibintu nyuma yo kubona ibyaguzwe.Mu minsi 2, ibintu bizaba byarangiye.Mu minsi 5-7 (Kuwa mbere kugeza Kuwa gatatu), ibintu bizaba byarangiye.Kohereza kuri ibihugu byinshi bishobora gutwara igihe runaka.1. Politiki yo kugarura
Twemera gusa impano zaguzwe kuri roymall.com. Impano y'ubuntu ntishobora kugarurwa. Kugirango impano ishobore kugarurwa, igomba kuba itarakoreshwa.Nyuma yo kubona inama, subiza impano yawe.Tuzakora impano yawe mu minsi 3-5 nyuma yo kubona.Impano zihariye ntizishobora kugarurwa.Koresha service@roymall.com cyangwa Whatsapp: +86193598494712.Politiki yo kugarura
Uzahabwa impano yawe nyuma yo kuyisubiza. Amafaranga yo kohereza ntayisubizwa.Koresha service@roymall.com cyangwa Whatsapp: +8619359849471Matek Systems MR24-30-TX MLRS MAVLink 2.4GHz TX Module Kit Receiver for FPV Drone
Specifications:
Brand: Matek
Item Name: MATEKSYS mR24-30-TX mLRS 2.4GHz TX module KIT
mR24-30
STM32G431KB
LoRa SX1281 w/TCX0
PA/LNA SKY68383-11
RF Frequency: 2.4GHz ISM
RF power: 13dBm(min)/ 20dBm / 24dBm / 27dBm / 30dBm(1000mW)
mRx-Tx Adapter
Built-in HC-04 Bluetooth module & Fan Controller
Power supply: 5-13V DC @ JR PIN3(VIN)
Antenna connector: IPEX MHF-1 to SMA / RP-SMA
mLRS Target: tx-matek-mr24-30-g431kb-default
LED Status:
[Red flashing 2Hz], not connected to transmitter
[Green flashing 1Hz], connected to transmitter
[Red and Green alternately ], Binding mode enabled
Binding:
After powering on, press the bind button (for about 4 seconds) on the receiver. When in bind mode, the green and red LEDs will blink alternatively with 2.4GHz.
Note:
This Product no SMA Antenna & 3D Printed Case Packed.
Package included:
1x mR24-30-TX
1x IPEX MHF1 to SMA Adapter Cable 5cm
1x IPEX MHF1 to RP-SMA Adapter Cable 5cm
1x 5V Fan (25*25*10mm) and Some Screws
